D-Link ® SmartPro DGS-1510-28P 28-Port Managed Stackable PoE Gigabit Ethernet Switch

The D-Link ® SmartPro DGS-1510-28P 28-port managed stackable PoE gigabit Ethernet switch with 92 Gb/s switching capacity supports up to 16000 entries per device of MAC address. It has 24 10/100/1000Base-T, two Gigabit SFP, two 10G SFP+ ports for better connectivity and forwards data packets at the rate of 68.45 Mpps. It supports IEEE 802.3/u/ab, 802.3ae 10 GbE, IEEE 802.3x flow control for full-duplex mode, Dynamic ARP inspection, DHCP server screening, ARP spoofing prevention, IPv6 snooping and DoS attack prevention protocols. Switch with 813.967 BTU/Hr heat dissipation consumes 238.7 W power and operates at the temperature of -5 – 50 deg C.

• Managed stackable Gigabit Ethernet switch is perfect for deployment in SME/SMB aggregation environments
• Dimensions: 17.36″H x 9.84″W x 1.73″D
• Ports: 24 x 10/100/1000Base-T, two Gigabit SFP and two 10G SFP+
• Input voltage: 100 – 240 VAC at 50/60 Hz, Max. power consumption: 238.7 W (PoE-on), 29 W (PoE-off), 21 W (standby)
• Switching capacity: 92 Gb/s
• MAC address table size: 16000 entries per device, Packet buffer memory: On-chip 1.5MB, Packet forwarding rate: 68.45 Mpps
• Diagnostic LEDs: Power, activity/link, speed
• Heat dissipation: 813.967 BTU/Hr, Acoustics: 46.4 dBA
• Network protocol and standards: IEEE 802.3/u/ab, 802.3ae 10 GbE, IEEE 802.3x flow control for full-duplex mode
• Temperature: -5 – 50 deg C (operating), -20 – 70 deg C (storage), 0 – 95 percent RH non-condensing operating/storage humidity
• Security: Dynamic ARP inspection, DHCP server screening, ARP spoofing prevention, SSH – supports IPv4/IPv6, SSL – supports v1/v2/v3, IPv4/IPv6
• Meets CE, FCC, C-Tick, VCCI, BSMI, CCC, Safety cUL, CB certifications and standards
• Weight: 2.54 kg
• Comes with lifetime limited warranty

Specifications